Ball joint S45C
ball stud SCM435 HB195-260 Swing angle 39° all around
20mm extension type
Special parts that can correct the S2000 roll center and change it to the ideal geometry are now available. The
lower arm angle of the S2000 with a lowered vehicle height becomes an inverted V shape, and the roll center point is too low.
The center of gravity of the vehicle and the roll center are separated, which increases the amount of roll and sacrifices cornering force.
The suspension stroke is also reduced and the limit is lowered.
By installing the J'S RACING roll center adjuster, the lowered roll center can be corrected to the ideal position (correcting the distance between the center of gravity of the vehicle and the roll center to a shorter position), achieving ideal suspension geometry.
[Effects of installation]
★Reduction in roll amount
★Improved tire ground contact
★Improved steering responsiveness
★Increased cornering force
Special parts born from know-how in Super Endurance and Time Attack
Can be used on any stage, from street to circuit.
*Cannot be installed on vehicles with 16-inch wheels.
Pressing work is required for installation.
We recommend having the replacement done at a professional shop.
After replacement, vehicle height adjustment and alignment adjustment are required.
Please install correctly, observing the specified torque.
*After installation, please check the tightening of the bolts and nuts regularly.
Please do this every time, especially before driving on a circuit.
